STRONGTrapezoidal roof and façade sheet
A roof and façade profile that is an economical and practical answer for roofing, façade cladding and suspended ceilings — it also goes onto curved roofs.
The same profile from roof to suspended ceiling
It goes onto a concrete, steel or timber frame, and onto curved roofs too — one profile covers the roof, the façade and the ceiling of the same building.
A roof and façade profile that is a very economical and practical answer for a wide range of building work, including roofing, façade cladding and suspended ceilings. Its cover width is 1,100 mm, and the customer chooses the length, thickness and colour, which makes this profile remarkably adaptable to different projects. The rib height is 20 mm, which adds to the stability and load capacity of the sheet.
This trapezoidal sheet is exceptionally flexible because it can go onto different kinds of supporting frame — concrete, steel or timber — which gives it a wide field of use, curved roofs included. It is fixed with special screws with a neoprene washer into the lower zone of the roof sheet, and installation should be carried out by trained, competent people so that the work lasts and is done correctly.
One profile, the whole building
Why choose the STRONG trapezoidal sheet?
Because of its wide field of use and complete adaptability, its dependable stability and load capacity, its appearance and choice of colours, its simple and safe installation, and — most important — its long life with minimal maintenance.
A wide palette that adds to the look of every building.
“Thicker is better”, as our saying goes — a range from 0.40 to 0.60 mm.
A layer applied to the underside of the sheet to prevent the condensation caused by differences in temperature.
The sheet is simple to fit because it is light and practical, needs fewer components and goes up quickly.
Technical details of the STRONG trapezoidal sheet
Length, thickness and colour of the sheet are matched to the requirements of the project. The shades shown are indicative — the actual colour may differ from what the screen shows.
Set the roof and try the colour
The view is indicative. The actual shade may differ from what the screen shows.
Frequently asked questions
Find answers to the most common questions below.
If you do not find what you are looking for, feel free to get in touch!
Traditionally, spring and summer are the most popular times to fit a roof. Dry, settled weather means faster work and less risk of delay. Thanks to modern methods and quality materials, a roof can be laid at any time of year.
Our sheets are galvanised, which means they carry a zinc coating that prevents rust and extends their service life.
Profiled sheets are light, corrosion-resistant, long-lasting and simple to install.
Yes. The width of the sheets is fixed, while the length can be chosen to suit your project.
