Gutter stop end
The stop end closes the gutter at the end of the run. Without it, the water that reaches the end simply spills over the edge — down the fascia and over the façade. It is made of the same sheet coated on both sides as the gutter and in the same RAL shade, and its lower edge follows the bead of the gutter, so the end piece sits into the profile without a gap and does not read as a separate part.
- Sun and UV
- Rain
- Snow and frost
- Wind
The same sheet and coating as the roof — proof against all weather.
What the data sheet says
- Sheet thickness
- 0.55 mm
- Material
- Steel sheet coated on both sides
- Zinc coating
- 140 g/m²
- Colour coating
- at least 25 μm
- Dimensions from the drawing
- 195 × 105 mm
- Colour
- RAL palette, the same as the roof sheet
- Product code
- 7021
- Drawing
- no. 180 · 23 December 2011 · scale 1:2.5
The data sheet refers to the stop end for a half-round gutter; the radii on the drawing are R56, R73 and R80.
It does not go alone
The element is part of the rainwater system — gutter, brackets, angles, outlet, bends, downpipe and clips. Open the whole system and see how they join.
Open the whole system
Need quantities and a colour?
Tell us the length of the eaves, the number of outlets and the RAL — we will send back a schedule with quantities and a delivery date.