Offset bend
The gutter hangs at the eaves while the downpipe has to stand against the wall — the offset bend bridges that difference. Two are used, one under the outlet and one inverted below it, so the pipe between them runs at an angle and returns to the façade. It is bent at 72° and has a swaged end like the pipe, so everything joins on without extra couplings.
- Sun and UV
- Rain
- Snow and frost
- Wind
The same sheet and coating as the roof — proof against all weather.
What the data sheet says
- Bend
- 72°
- Diameter
- ⌀ 100 mm
- Zinc coating
- 140 g/m²
- Material
- Steel sheet coated on both sides
- Colour coating
- at least 25 μm
- Colour
- RAL palette, the same as the roof sheet
Made in three sizes — ⌀ 80, ⌀ 100 and ⌀ 120 — following the diameter of the downpipe.
It does not go alone
The element is part of the rainwater system — gutter, brackets, angles, outlet, bends, downpipe and clips. Open the whole system and see how they join.
Open the whole system
Need quantities and a colour?
Tell us the length of the eaves, the number of outlets and the RAL — we will send back a schedule with quantities and a delivery date.