Gutter bracket
The bracket is what the gutter rests on. A strip of sheet is bent into a seat that follows the gutter profile, and the long tail is nailed to the roof deck — before the covering goes over it, so that it is out of sight afterwards. Holes run along the tail, so that each bracket is fixed at several points. A longitudinal rib keeps the strip from spreading under the weight of water and snow.
- Sun and UV
- Rain
- Snow and frost
- Wind
The same sheet and coating as the roof — proof against all weather.
What the data sheet says
- Installation
- Nailed to the roof deck
- Zinc coating
- 140 g/m²
- Colour coating
- at least 25 μm
- Material
- Steel sheet coated on both sides
- Colour
- RAL palette, the same as the roof sheet
Brackets are set in a row before the covering goes on, and the height of each next one sets the fall of the gutter towards the outlet. They are made for half-round and for square gutters alike, in sizes that follow the gutter diameter.
It does not go alone
The element is part of the rainwater system — gutter, brackets, angles, outlet, bends, downpipe and clips. Open the whole system and see how they join.
Open the whole system
Need quantities and a colour?
Tell us the length of the eaves, the number of outlets and the RAL — we will send back a schedule with quantities and a delivery date.