Continuous snow guard
Unlike individual snow guards, the continuous one runs in an unbroken line along the eaves and holds the snow over the whole width of the roof plane — there are no gaps for the mass to pass through. The section is a triangle: the upright face is the one that holds the snow, the sloping face stiffens it so that it does not bend under load, and the lower face bears on the roof and takes the fixing. It is made of the same sheet coated on both sides as the covering, so in the same RAL shade it merges with the roof.
- Sun and UV
- Rain
- Snow and frost
- Wind
The same sheet and coating as the roof — proof against all weather.
What the data sheet says
- Installation
- An unbroken line along the eaves
- Zinc coating
- 140 g/m²
- Colour coating
- at least 25 μm
- Material
- Steel sheet coated on both sides
- Colour
- RAL palette, the same as the roof sheet
- Drawing
- no. 42 · 20 October 2011
It is fitted on the lower part of the roof plane, above the eaves. On steeper roofs and in areas with a higher snow load a second row is added, further up the roof.
Need quantities and a colour?
Tell us the length of the eaves, the number of outlets and the RAL — we will send back a schedule with quantities and a delivery date.