External gutter angle
The external angle is the corner of the gutter run at an outward corner of the building. Its profile is the same as the gutter’s and passes through the corner without a break, so the water turns without ever leaving the channel. The arms join on to the gutter with couplings, exactly as two lengths of gutter join to each other.
- Sun and UV
- Rain
- Snow and frost
- Wind
The same sheet and coating as the roof — proof against all weather.
What the data sheet says
- Angle
- 90°
- Profile
- The same as the gutter, half-round
- Installation
- On brackets, continuing the gutter run
- Zinc coating
- 140 g/m²
- Colour coating
- at least 25 μm
- Material
- Steel sheet coated on both sides
- Colour
- RAL palette, the same as the roof sheet
For an inward corner of the building the internal angle is used — the same piece, only bent the other way.
It does not go alone
The element is part of the rainwater system — gutter, brackets, angles, outlet, bends, downpipe and clips. Open the whole system and see how they join.
Open the whole system
Need quantities and a colour?
Tell us the length of the eaves, the number of outlets and the RAL — we will send back a schedule with quantities and a delivery date.