Internal gutter angle
The internal angle is the corner of the gutter run at an inward corner of the building — where two eaves meet towards the inside. The channel passes through the corner without a break, so the water turns without ever leaving the gutter. The arms join on to the gutter with couplings, exactly as two lengths of gutter join to each other.
- Sun and UV
- Rain
- Snow and frost
- Wind
The same sheet and coating as the roof — proof against all weather.
What the data sheet says
- Angle
- 90°
- Profile
- The same as the gutter, half-round
- Installation
- On brackets, continuing the gutter run
- Zinc coating
- 140 g/m²
- Colour coating
- at least 25 μm
- Material
- Steel sheet coated on both sides
- Colour
- RAL palette, the same as the roof sheet
For an outward corner of the building the external angle is used — the same piece, only bent the other way.
It does not go alone
The element is part of the rainwater system — gutter, brackets, angles, outlet, bends, downpipe and clips. Open the whole system and see how they join.
Open the whole system
Need quantities and a colour?
Tell us the length of the eaves, the number of outlets and the RAL — we will send back a schedule with quantities and a delivery date.